LNB Digital SCR Unicable II GT-SAT GT-S1dCSS24

UNICABLE II converter programmed for Polish platforms: nc+ and Cyfrowy Polsat !!! Ready for action !!!

Programmed for the following receivers:Cyfrowy Polsat:- Unicable I/II technology (EN50494 + EN50607): Evobox PVR- Tedchnologia I Unicable I (EN50494): Mini HD 2000, HD 3000, HD 5000, HD 5500s, HD 6000, HD 7000 PVRNC+:- Unicable I/II technology (EN50494 + EN50607): 4K UltraBOX- Technology I Unicable I (EN50494): mediaBOX+ (ADB ITI-3740SX), turboBOX+ (ADB ITI-5720SX), wifi PremiumBOX+ (ADB NCP-4740SF), BOX+ ADB ITI-2849/2850/2851S), PVR BOX+ (ITI-5800SX)Settings in receivers:- In the Polsat Evobox PVR receiver we can choose 3 rigid unmanaged modes of operation, the first is the traditional Unicable settings And then we occupy channels 1-4, the second setting is Evobox 1 we will take channels from 5 to 12, the third is the Evobox 2 setting, then we occupy channels from 13 to 20. We must remember that in one installation one cable so that the work channels do not overlap! Example of a multiroom: two Evobox PVR, one in settings 1 and the other in 2! + e.g. decoders in total 4 multiroom HD 6000- In the receiver nc + 4K UltraBOX there is no problem because the receiver allows full management of work channels and their frequencies that we can easily edit, so we choose in fact the frequencies we want or any free in the installation max up to 8 channels per decoder. Other models of receivers support Unicable I technology, so we can install 4 set-top boxes or one with four channels of work for PVR!- In one installation, of course, there can be Polsat and NC+ decoders, e.g. 4 ordinary multiroom in the Unicable I standard, Evobox PVR + 4K UltraBOX thanks to Unicable I/II technology !!! LNB Unicable SCR GT-SAT GT-S1dCSS24 for single-wire (serial) signal transmission up to a maximum of 24 receivers with the Unicable II designation in the menu, lnb also has three outputs of standard satellite signal for the other three satellite receivers.
UNICABLE technology consists in the rigid reservation of part of the IF band for each of the connected satellite tuners. The tuner sends requests to the access converter to the transponder and receives a signal on the reserved frequency. A prerequisite for the use of UNICABLE technology is its implementation in the tuner. A prism showing the solution of the installation:

List of programmed 24 frequencies in LNB for nc+ and Cyfrowy Polsat receivers:

Unicable I EN50494
1 1210MHz (EN50494 + EN50607)
2 1420MHz (EN50494 + EN50607)
3 1680MHz (EN50494 + EN50607)
4 2040MHz (EN50494 + EN50607)
5,978MHz (EN50494+EN50607)
6 1028MHz (EN50494 + EN50607)
7 1072MHz (EN50494 + EN50607)
8 1116MHz (EN50494+ EN50607)

Unicable II EN50607
9 1160MHz (EN50607)
10 1271MHz (EN50607)
11 1315MHz (EN50607)
12 1359MHz (EN50607)
13 1484MHz (EN50607)
14 1528MHz (EN50607)
15 1572MHz (EN50607)
16 1616MHz (EN50607)
17 2084MHz (EN50607)
18 2128MHz (EN50607)
19 1816MHz (EN50607)
20 1860MHz (EN50607)
21 1904MHz (EN50607)
22 1948MHz (EN50607)
23 1992MHz (EN50607)
24 1728MHz (EN50607)

Product features:
- Model GT-S1dCSS24
- 1x SCR output for up to 24 receivers on one coaxial cable (must be compatible with SAT-SCR standard)
- 1x output for standard SAT receiver (Multiroom)
- Attenuation: 0.1 dB (typ)
- Legacy port gain: 57 - 61dB
- SAT-SCR port gain: 42 - 62 dB
- Inter-wire insulation:> 22dB
- Control: DiSEqC 1.0
- Temperature range: -40°C to +65°C
- Legacy port power consumption: 100mA
- Power consumption SAT-SCR port: 300mA
- Diameter Ø 40mm
- Compatible with HDTV and DVB-S2Data Sheet:http://dmtrade.pl/katalogi/GT-SAT/gt-s1dcss24/gt-s1dcss24.pdf