S-AC 200PProfessional TIG WELDING Machine AC/DCS-AC 200P:
- - Efficiency - thanks to MOSFET inverter technology, the welding machine achieves an efficiency of up to 93%
- - Versatility - AC and DC current, TIG welding and coated electrode,
- - Convenience - very long, eight-meter MMA, TIG and bulk cables, increase the range and comfort of work, especially when reaching hard-to-reach places,
- - Mobility - handles facilitate convenient carrying,
- - Intuitiveness - clear control panel equipped with a display and LED indicators and a convenient foot pedal make it easy to use the device,
- - Durability - electrical components have been surface mounted using a laser (SMT method - Surface Mount Technology), which increases resistance to vibration, and an efficient fan cools the machine,
- - Multi-functionality - Non-contact HF arc ignition, Initial and final current adjustment, Gas Post-Flow Time, Pulse, Pulse fill, AC current balance, 2T, 4T, Hot Start, Arc-Force, Anti Stick,
- - Rich set - ceramic nozzles, long cap, collets, sachet for accessories and others.
- - Model - S-AC 200P
- - Catalog no. - 2001
- - Article status - New
- - Housing material - Plastic, steel
- - Rated input voltage - 230 V / 50 Hz
- - Functions - TIG AC/DC, MMA, Pulse
- - Rated input current - 19 A
- - Maximum input current - 28 A
- - Rated input power - 4,1 kVA
- - Maximum input power - 6 kVA
- - Idle voltage - 56 V
- - Welding current TIG DC - 5 - 200 A
- - Welding current TIG AC - 20 - 200 A
- - Welding current MMA - 10 - 200 A
- - Pulse current - 20 - 200 A
- - Rated duty cycle - 60 %
- - Welding current in the duty cycle 100 % - 154 A
- - Welding current in the duty cycle 60 % - 200 A
- - Pulse frequency - 0.2 - 25 Hz
- - Pulse fill - 0.1 - 0.9 (10 - 90%)
- - AC output current frequency - 60 Hz
- - Gas outflow time after welding - 1 - 10 s
- - AC (Clean Width) parameter - -5 - +5
- - TIG electrode diameter - 1 - 3.2 mm
- - Electrode diameter MMA - 1 - 4 mm
- - Non-contact TIG HF ignition - Yes
- - ARC-Force, Hot Start, Anti Stick - Yes
- - Remote control connection - Yes
- - Mode 2 and 4 TAKT change switch - Yes
- - Chassis cooling - Fan
- - Method of cooling the handle - Air
- - Thickness of welded material - 0.5 - 10 mm
- - Length of TIG, MMA and ground wires - 8 m
- - TIG electrode diameter - 1 - 3.2 mm
- - Electrode diameter MMA - 1 - 4 mm
- - Insulation class - F
- - Degree of protection - IP21
- - Dimensions (LxWxH) - 50 x 32.7 x 35.7 cm
- - Weight - 19.8 kg
- - Shipping dimensions (LxWxH) - 60 x 44 x 53.5 cm
- - Shipping weight - 36 kg
- - Welding machine
- - MMA cable – 8 m
- - Ground wire with clamp – 8 m
- - TIG cable – 8 m
- - Ceramic nozzles – 3 pcs.
- - Long cap – 1 pc.
- - Collets – 3 pcs.
- - Clamping sleeve in the housing – 1 pc.
- - Foot pedal
- - Accessory sachet