The AS350 drive is designed for swing gates with a single leaf length of up to 3.0 m and a weight of up to 300 kgThanks to many technological facilities, the device is safe and convenient to use
The soft start and stop function smoothly regulates the speed of the drive when starting and stopping the gate This significantly reduces overloads resulting from a rapid change in the speed of the gate, which translates into a longer service life of the mechanical components of the drive and a reduction in the noise levelThanks to the built-in overload protection, if a collision of the gate with an obstacle is detected during closing, the drive will immediately stop and then open the gateFunction automatic closing of the gate, allows you to determine the time from full opening, after which the gate will automatically closeIn addition, the drive automatically locks after the end of movement, preventing manual opening of the gateThanks to this, there is no need for additional devices to protect the gate against openingIn the event of a drive or power failure, it is possible to manually release the lock using a keyDuring the first start or resumption of work after a power outage, the drive will automatically perform a full cycle, thus setting the end positions of the door leaf so that later its operation runs smoothlyIt is possible to control the drive with one button in the sequence: open - stop - closeThe gate control can be programmed in the gate mode, i.e. opening a single leaf (motor 2)
The set includes: 2 telescopic actuators (self-locking), main controller with radio receiver, 2 remote controls, 2 sets of photocells (transmitter + receiver pair), emergency uncoupling key, mounting accessories with a solid stop