S-MIGMA-175Mulfunctional semi-automatic weldingMIG, MAG, FCAW and MMAdistless welding current regulation (max 155 A) IGBT inverter technologyhigh degree of trouble-free efficient operation and fast switching between functions is resistant to short circuitsProductive features:
- - Versatility - the ability to weld in MIG, MAG, FCAW and MMA modes ,
- - Practicality - suitable for machining elements made of various weldable metals,
- - Efficiency - the use of modern IGBT technology guarantees precise work and safety against short circuits,
- - Convenience - easy operation is guaranteed by an intuitive control panel and a stepless knob that allows you to precisely set the wire feed rate,
- - Mobility - comfortable handle and small dimensions make it easy to move the equipment.
- - Model - S-MIGMA-155
- - Catalogue number - 2204
- - Article status - New
- - Rated input voltage - 230 V
- - Mains frequency - 50 Hz
- - Rated input current - 11 A MIG, 13 A MMA
- - Idle voltage - 22 – 36 V
- - Welding current (MMA/MIG) - 60 – 155 A
- - Duty cycle (MMA/MIG) - 15%
- - Welding current in the duty cycle 100% (MMA/MIG) - 60 A
- - Wire diameter - 0.6 – 0.8 mm
- - Wire type - Full/Core (FLUX)
- - Wire feeder - Internal
- - Cable length with MMA holder - 1.1 m
- - Ground wire with clamp - 1 m
- - MIG holder - 1.65 m
- - Power cord - 1.5 m
- - Chassis cooling - Fan
- - Dimensions (LxWxH) - 42 x 23 x 38 cm
- - Weight - 25.4 kg
- - Shipping dimensions (LxWxH) - 54 x 29 x 42 cm
- - Shipping weight - 28.9 kg
- MIG/MAG - With the MIG method, stainless steel, tin, copper and other non-ferrous metals can be conveniently bonded, while the MAG mode will work when welding low-alloy, high-alloy or structural non-alloy steels
- MMA (coated electrode) – it will work indoors and outdoors. It does not require shielding gas and is suitable for welding thin materials (from a thickness of 1.5 mm), e.g. copper, iron, nickel, aluminum or alloys m.in steel and cast iron. Welds made by this method have good operational and mechanical values.
- FCAW (arc welding with core wire) - a method that does not require the use of shielding gas. Thanks to this, it will work well when working outdoors, in windy places. This mode is characterized by a large depth of melting.
- - Welding machine S-MIGMA-155
- - Wire spool 0.8 mm – 1 kg
- - MIG contact tip – 2 pcs.
- - Gas nozzle
- - Manual EN