REMARK!!!
In this
At the moment, the netCLONE+ adapter only works as a WiFi adapter on the local network
!!!
To use
netCLONE+, you must have an active Multiroom operator service with decoders
and satellite installation. netCLONE+
Multiroom WiFi Adapter works with
any Multiroom service offered by nc+ (Multiroom
HD Standard and Multiroom Premium HD). You can also use the app
mobile operator (e.g. nc+ GO) in each zone, using the possibilities of
operation of the netCLONE+ device in WDS wireless network mode.
PRE-SALE. Availability of goods
end of May. Take advantage of the unique
Opportunity. netCLONE+ available for pre-order by up to 50%
Cheaper. Only now you can have
netCLONE+ at a special price of 199 zł Shipping
from 31.05.2014r later the price of the device 399zł
In
In the case of nc +, the operator offers
up to six decoders as part of the Multiroom service, therefore with
with netCLONE+ you can create up to six zones. In every
location should have an operator's decoder with satellite installation, and
also wireless internet connection (WiFi network). In a situation where in
more than one operator decoder will be placed in one zone, there is
Only one netCLONE+ device can be used for this zone, under
the condition of having additional equipment (other standard WiFi device or
switch with wiring). All configuration options are shown on
the following examples.
Between
netCLONE+ devices located in different independent locations
(zones) not limited by space, virtual LAN cables are created,
Thanks to them, all set-top boxes are connected as if they were in one network
home LAN, which is a unique advantage of the device.
Thanks to the special
SSL-secured interface, manage all devices
netCLONE+ in each zone is online and is fully
Comfortable.
Key Benefits
Interface:
- online access to
management panel,
-bylaw
netCLONE+ devices,
-Broadcast
zone permissions to connect to other zones,
- notifications about
operation of netCLONE+ devices,
- and many
Other.
Configuration
1.
On the above
The diagram shows a situation in which the maximum number of zones has been created
(six zones). In each zone there is a netCLONE+ device connected to
decoder with an Ethernet cable, the set-top box is connected to the satellite dish.
netCLONE+ is connected wirelessly to your home WiFi network just like any other
devices (laptop, smartphone, etc.). The process of connecting netCLONE+ to a WiFi network
It is extremely simple and intuitive, it is done using a special interface
WEB. Details are provided in the instruction manual.
Configuration
2.
The diagram above
presents the possibilities of using netCLONE+ in a situation where in one zone
There are more set-top boxes and TV sets. Note that in each
in a zone where there are more decoders, it is enough to apply only
one netCLONE+ device and, using a regular switch, connect to it
Two or more decoders. Remember, however, that each decoder must also be
connected to the satellite installation and netCLONE+ connected to the home network
WiFi.
Configuration
3.
If you have
already other standard WiFi adapters, nothing stands in the way of
using them, connect the decoders to the netCLONE+ device within one
zones wirelessly. The wireless network in netCLONE+ works in WDS mode. With
On one side, the device can connect wirelessly to the home local network,
on the other hand, with other standard WiFi adapters connected to set-top boxes.
Also note that the location of the black (main) decoder is completely
any – it can be located in one zone also with other decoders.
Remember that in any case, each set-top box must be connected to the installation
Satellite.
REMARK!!!
Where in the installation
wifi adapters are needed, LB-LINK adapters are doing very well and a plus
Their use is the price because they are much cheaper than other adapters with similar
Parameters. Below LB-Link models working with
netCLONE+
LB-LINK
BL-MP01 150M wireless Repeater/Router/AP (NC+ multiroom)
LB-LINK
BL-MP02 wireless Repeater/Router/AP (NC+ multiroom)
NetCLONE+
will open in front of you
new possibilities of your Multiroom.
netCLONE+
Multiroom WiFi Adapter is the only one of its kind
Devices on the market that have so many advantages and possibilities, specially
dedicated to the Multiroom service. Perfectly adapted to you and your
Needs. This is the perfect solution for you if you are a subscriber of the platform
digital offering a Multiroom service based on the Internet home network LAN (eg.
nc+). You may not know it yet, but your Multiroom hides a lot
more possibilities.
Do you dream of
TV without limits?
Multiroom, which
offers your digital platform is just the beginning. Thanks
netCLONE+
You can enjoy
full freedom in using the Multiroom service. While Multiroom offered
by your operator allows you to use this service only in one
localization, dedicated netCLONE+
allows you to
extension of the Multiroom service to several independent, unlimited zones
Spatially. Thanks to the use of a WiFi connection, netCLONE+
is comfortable,
wireless solution, without the need to connect set-top boxes with cables in
of a given location.
netCLONE+ is
The only solution that allows you to enjoy full freedom in using
Multiroom services.
Use of
netCLONE+ is convenient.
netCLONE+ provides
comfort that no other Multiroom solution gives. With netCLONE+
you can use the Multiroom service in several locations, unlimited
Spatially. What's more, with netCLONE+ you don't have to worry about connecting
decoders with wires.
Use of
netCLONE+ is also simple and intuitive.
netCLONE+ is
An intelligent solution, making its installation very easy and
takes only a moment, and further use does not require any from you
additional actions. All you need is an active channel package with
Multiroom service and wired internet connection.
netCLONE+ is
frugality.
If you use
Multiroom operator services and you want to watch all channels of your package
Also in another location, you do not have to pay another subscription. netCLONE+
allows you to extend the range of your Multiroom, so you can enjoy
TV even in six independent zones.
Features
Ports
1 x 10/100 LAN
Mbps
Buttons
Restore settings
Factory
Control
Diagnostic
5 x
LED
Power
12 volts DC / 1.0
A
Dimensions
112 x 97 x 50
Mm
Type
Antenna
Internal
Transmission
Wireless
Standards
Wireless
IEEE 802.11n
IEEE
802.11g
IEEE 802.11b
Frequency
Work
2.4
Ghz
EIRP
Operating modes
Wireless
WISP
WDS
Safety
Wireless
64/128 bit WEP,
WPA-PSK / WPA2-PSK
Range
Device
up to 80 meters in
open space
Software
Management
interface
WEB
Online zone management
Safety
Transmission
encryption
SSL
firewall
Protection against attacks
Dos
Other
Certificates
CE
Content
Packaging
netCLONE+
PYCH-NCP77014
power supply
Ethernet cable
Quick Start Guide
Installation
Requirements
System
Microsoft® Windows®
(32bit, 64bit) – 2000, XP, Server 2003, Vista, Server 2008, 7, Server
2008R2, 8, MAC® OS, NetWare®, UNIX® or Linux.
Environment
Work
Permissible
Operating temperature: -10~60