The G3 brushless motor from Hobbywing is a real, secret weapon for Stock racing! The modified design of the new engines in the Stock and Modified versions translates into their reduced weight and even better performance. Thanks to the optimal heat dissipation system, you do not have to worry about overheating the engine. What's more, the Stock Spec models have increased torque and KV value by 4% and 16% respectively compared to the V10 G2 Stock Spec engines!
The G3 Modified and Stock engines weigh just 161 g and 132 g respectively. Compared to the V10 G2 engine, their weight has been reduced by about 11% and 22%! Thanks to the reduced weight, drivers can easily adjust the balance of their vehicles.
Compared to the V10 G2 engine, the size of the front bearing has been increased by as much as 26% for the correct load capacity. To effectively reduce drag, the size of the rear bearings has been reduced by 6%. Thanks to this solution, the operation of the engine is more stable and smoother.
Mechanical timing allows accurate and smooth adjustment of settings. Non-slip lines located at the rear of the engine ensure the stability of the values selected during adjustment. In turn, the built-in Hall sensor in combination with a precise rotor guarantees incredible linearity of the engine.
End plates with large holes, which are used in the 3.5T~5.0T and 10.5T~21.5T engines, guarantee effective heat dissipation from the engine for off-road vehicles. On the other hand, the end plates with small holes used in 5.5T~8.5T engines effectively prevent sand or other contaminants from entering the engine, while protecting it from damage. Easily adjust the boards to your needs or preferences!
The specially designed housing design exposes the stator core to air, which maximizes motor cooling. Large holes* on the front and rear end plates provide excellent heat dissipation from the engine.
*It is worth remembering that 5.5T~8.5T engines are usually used in off-road vehicles, so the factory engine end plates have small holes.
A high-quality stator core, heat-resistant (up to 200°C) pure copper wire and rotor, premium high-precision bearings and durability, and soldering pads with incredible current resistance – all guarantee unparalleled performance and motor durability.
Thanks to the removable design, you can easily keep the engine clean. Moreover, regular cleaning and maintenance will prolong its service life and preserve its performance.
Model | 30401123 |
---|---|
Scale | 1:12 |
Type | BL |
Number of gears | 2 |
KV | 6300 |
Number of turns | 6.5T |
LiPo cells | 2S |
Maximum output power | 428 watts (Printing) |
Electricity at max. output power | 107 amps |
O.D. | 35.9 mm |
Dimensions | Length – 51.2 mm, shaft diameter – 3.17 mm, shaft length – 13.3 mm |
Scales | 150 g |
Front bearing | D9*D4*t4 |
Rear bearing | D8*D3*t4 |
Rotor | 5-12.5 |
Timing | 20-50 |
Applications | 1:12 Modified Class, On-Road Racing |