A modern and intuitive gadget, i.e. a pump similar in size to a powerbank, is a great help when inflating tires. During this activity, it allows you to monitor the tire pressure so that there is no over-inflation. The device has the ability to charge wirelessly, and thanks to its capacious battery you do not have to worry about running out of electricity. The pump is easy to use and safer than a traditional compressor.
The product is compatible with various objects – it can inflate the wheels of cars, motorcycles, bicycles and even balls. To inflate the tire of the car, 4 minutes are enough. It is able to inflate up to 9 car tires in the range from 0 to 2.5 bar. To fully inflate the basketball, it takes less than a minute, the device can inflate as many as 54 balls of size number 5.
It has the same size as most power banks. The pump can be easily stored anywhere in the car. It is made of solid, durable metal while maintaining an elegant appearance. The device is resistant to overheating, thanks to a solution that dissipates heat. All through the use of 274 holes in the housing on each side. Natural rubber, which covers cables, is prone to bending and does not break. In addition, the design allows a 20% noise reduction, making the device much quieter than a standard pump.
The device has an intelligent sensor built into the air flow nozzle, which automatically regulates the pressure with which air is forced into tires or balls.
Standard mode has been set to measure tire pressure. If you don't know what the standard tyre pressure is, you can always inflate the tyre. You can easily increase or decrease the pressure to suit your needs. The device is not only handy and easy to use, it greatly facilitates everyday functioning even during the toughest route.
Under the LED display there are function buttons that you can customize according to your needs. You don't have to worry about constantly looking at the display – it will automatically stop pumping air when the tire reaches its ideal pressure level. It also shows the battery status.
PTFE material is resistant to high temperatures, its execution allows for full stabilization of the housing, even magnesium with low voltage works during high engine speeds. Do not be afraid of cylinder explosion during too large pressure pumping changes.
The copper coil of the device motor reduces noise. The design has been perfectly applied to significantly reduce the mechanical sound caused by the resonance of the coating of the device.
Built-in LED light ensures safe use of the product at night. In the event of an accident, the lamp can send an SOS signal.
The device is equipped with additional accessories such as: a tube made of high quality materials that prevent the tube from breaking, has a USB charging cable that can be connected to the car charger and includes a built-in air nozzle that has been specially adapted to inflate the basketball.
Apply a suitable nozzle. Press M to adjust the pressure of the machine. Connect the hoses and press the OK button to start pumping. When the device is finished, pull out the nozzle.
| Producer | Baseus |
|---|---|
| Model | Energy Source Inflator Pump |
| Product code | CRCQB02-0A |
| Scales | 610 g |
| Input voltage | 5V/2.4A |
| Battery capacity | 27.75 WH |
| Power | 54W |
| Charging time | from 4 to 5 hours |
| Dimensions | 78.2 x 140.2 x 42.6 mm |
| Blood pressure gauge range: | 5~150PSI (display flashes when 150PSI is exceeded; exceeding 150PSI may damage the sensor) |
| Supported pressure | within 120PSI. |
