ADAPTER FOR POWER SUPPLY VIA TWISTED PAIR CABLE AWZ-603 PULSAR

This product is not available

Availability:: expected delivery
Brand:
Product code:: AWZ-603 / 5902135303283

Specification

Current consumption::	16 mA @ 24 V DC 32 mA @ 48 V DC
Dimensions::	150 x 53 x 25 mm
Input voltage::	20 ... 56 VDC
Manufacturer / brand::	PULSAR
Maximum output current::	4 x 0.5 A
Number of inputs::	4 pcs. RJ-45 - LAN 1 pc Power supply - 5.5 / 2.1 mm DC 1 pc Power supply - screwed terminals
Number of outputs::	4 pcs. RJ-45 - LAN & PoE
Operating temperature::	-10 °C ... 50 °C
Output voltage::	20 ... 56 V DC - equal to the input voltage
Scales::	0.116 kg
Security::	Short-circuit Overload Surge Protector
Selected features::	Ethernet 10/100 Mbps LAN & PoE ports 4 pcs RJ-45 connector pin numbers 4, 5 (+) and 7, 8 (-) - Power supply Fuse fuse : 4 x 0.5 A ( Option - 1 A ) FPS output - Fault indication Wire cross section : max. 2.5 mm² (screw terminals) Mounting with screws The bottom layer is equipped with Adhesive tape Class II
Signal diodes::	green L1-L4 LED - inform about the fuse burnout (no lighting means blowing the fuse) red LFPS - informs about the supply voltage (DC IN)
Warranty::	2 years

The AWZ-603 panel is a passive device designed to add PoE power in twisted pair cables running to end devices As a standard, 1, 2, 3 and 6link cables are used for data transmission. 7, 8(-) supply voltage

On the front of the panel there are two rows of RJ-45 socketsThe panel is able to add power to 4 PoE devices

AWZ-603 is a passive device

Each output is equipped with short-circuit protection (SCP), in the form of a fuse F0.5A and surge – varistorsThe state of the outputs is indicated by four LEDs L1÷L4The failure of the fuse is signaled by turning off the appropriate LEDIn addition, in the event of a failure, the FPS output and the FPS diode are switched on and the relay contacts are switchedOPSSERSRSISS interface can be used to remotely control the status of the PoE module

Remark! The device is designed to work in 10/100 Mb/s networksThe product is not suitable for use in Gigabit Ethernet networks, where all pairs of twisted pair cables are involved in data transmission

Despite our best efforts, we cannot guarantee that the published technical data and photos do not contain inaccuracies or errors, which, however, cannot be a basis for claims.

ADAPTER FOR POWER SUPPLY VIA TWISTED PAIR CABLE AWZ-603 PULSAR

Specification

Product reviews