PROPERTIES
High-performance, well-covering white topcoat, designed for walls and ceilings inside rooms.
It gives the painted surfaces a matte finish.
It is easy to use and does not have an intense smell, does not require dilution.
SUBSTRATE PREPARATION
Start painting no earlier than after four weeks of seasoning fresh plaster.
Surfaces to be painted should be clean, dry, dedusted and crack-free.
Remove impurities, remnants of adhesive paints and peeling coatings.
Fill the cavities in the plaster with a suitable putty.
Places molded clean and remove the cause of the formation of the fungus.
Fresh plasters and substrates strongly absorbing water should be primed once with a primer.
Protect against dirt surfaces that will not be painted.
METHOD OF APPLICATION
Before painting, the paint must be thoroughly mixed.
Paint work should be carried out at a temperature above 5°C.
After their completion, ventilate the room until the characteristic smell disappears.
The ceiling and walls should be painted in the direction of incidence of light, starting from the window and heading into the interior of the room.
Do not paint with a semi-dry roller.
Each plane should be painted without interruptions in work and local corrections.
Apply the second layer after about 2 hours.
High-performance, well-covering white topcoat, designed for walls and ceilings inside rooms.
It gives the painted surfaces a matte finish.
It is easy to use and does not have an intense smell, does not require dilution.
SUBSTRATE PREPARATION
Start painting no earlier than after four weeks of seasoning fresh plaster.
Surfaces to be painted should be clean, dry, dedusted and crack-free.
Remove impurities, remnants of adhesive paints and peeling coatings.
Fill the cavities in the plaster with a suitable putty.
Places molded clean and remove the cause of the formation of the fungus.
Fresh plasters and substrates strongly absorbing water should be primed once with a primer.
Protect against dirt surfaces that will not be painted.
METHOD OF APPLICATION
Before painting, the paint must be thoroughly mixed.
Paint work should be carried out at a temperature above 5°C.
After their completion, ventilate the room until the characteristic smell disappears.
The ceiling and walls should be painted in the direction of incidence of light, starting from the window and heading into the interior of the room.
Do not paint with a semi-dry roller.
Each plane should be painted without interruptions in work and local corrections.
Apply the second layer after about 2 hours.