
Application The CA-210 amplifier is used as a subscriber amplifier to distribute the signal to several or several receivers.

The basic feature of the amplifier is its operation in the range of 40 - 400 MHz and 470 - 862 MHz. Thanks to the independent gain control in the VHF and UHF ranges, it is possible to adjust the gain to the signal level in a given band. This facilitates the construction of antenna installations that use one cable to bring signals from all antennas (after summing up with a crossover).

The amplifiers can be used in some cable networks or collective installations not working on special channels S30 - S38. The amplifier is recommended for use in situations where the signal level is low. In addition, it is also possible to power preamplifiers.


Safety when using the amplifier
The CA-210 amplifier is powered from a built-in stabilized power supply. It is not intended for use in open spaces. It cannot be installed in conditions of high humidity and near heaters and other heat sources. Provision of ventilation is required. Due to the possibility of damage, do not connect the power supply until all connections are properly made. The CA-210 amplifier allows you to power the preamplifiers with 24 V and a maximum current of 55 mA, e.g. Alcad mast preamplifiers.