The splitter is used for branching radio and television signals in collective and individual antenna installations. It allows signals to pass from one coaxial conductor to 6 conductors, while maintaining an even distribution of power. The splitter can be used instead of the end subscriber's socket if the subscriber wants to connect 6 TV sets.


The splitters are designed for indoor use. The electronic circuits of the splitters are made by the surface mounting technique and closed in the body in the form of a cuboid, cast from zinc alloys. The body provides the highest screening efficiency and mechanical resistance.
- Power pass: 24V 0.8A (max)
- screening factor: 5-2400MHz = 100dB
- Input / output connection: F-type sockets
- 75 ohm impedance
- Zinc housing, die-cast, nickel-plated
- Highly effective shielding

SPECIFICATION:
5-40MHz range
- Through loss: <10.5dB
- Output separation:> 22dB
- Feedback signal:> 10dB
Range 40-1000MHz
- Through loss: <11.0dB
- Output separation:> 20dB
- Feedback signal:> 12dB
Range 1000-1750MHz
- Through loss: <12.5dB
- Output separation:> 20dB
- Feedback signal:> 12dB
Range 1750-2400MHz
- Through loss: <15.5dB
- Output separation:> 20dB
- Feedback signal:> 10dB