The splitter is used for branching radio and television signals in collective and individual antenna installations. It enables signals to pass from one coaxial conductor to 3 conductors, while maintaining an even distribution of power. The splitter can be used instead of the end subscriber's socket if the subscriber wants to connect 3 TV sets.


The splitters are intended for use in closed rooms. The electronic circuits of the splitters are made by the surface mounting technique and closed in the body in the form of a cuboid, cast from zinc alloys. The body ensures the highest screening efficiency and mechanical resistance.
- Power pass: 24V 0.8A (max)
- screening factor: 5-2400MHz = 100dB
- Input / output connection: F-type sockets
- 75 ohm impedance
- Zinc housing, die-cast, nickel-plated
- Highly effective shielding

SPECIFICATION:
5-40MHz range
- Through loss:
- Output separation:> 22dB
- Feedback signal:> 10dB
Range 40-1000MHz
- Through loss:
- Output separation:> 20dB
- Feedback signal:> 12dB
Range 1000-1750MHz
- Through loss:
- Output separation:> 20dB
- Feedback signal:> 12dB
Range 1750-2400MHz
- Through loss:
- Output separation:> 20dB
- Feedback signal:> 10dB