It is recommended to install the device at a distance of 1-2 meters from any potential gas source (valves, cookers, burners).
ATTENTION!!!
In order to maintain the proper functioning of the device, the device should undergo regular inspections and be regularly tested!

Choosing where to install the gas sensor
In order to ensure the maximum level of protection, it is recommended to install the device in all rooms and at every level of a residential building (both where there are devices or installations that may be a source of gas escaping, but also in other rooms).
Service life of the gas sensor
The average service life of the device (electronic sensor) is approximately 5 years. This time is strictly dependent on the environmental conditions in which the device was operated, production date, number of alarm activations, etc.). It is recommended to regularly replace old models with new ones.

Safety tips for using your gas detector
In order to minimize the risk associated with gas, regularly (at least once every six months) have qualified specialists check the heating system, ventilation system, chimneys and exhaust gases from fuel-powered appliances. All heating devices should always be installed in accordance with the manufacturer's recommendations and local building codes. All devices should be installed and checked by specialists after installation. Regularly check the connections of the fuel supply or exhaust pipes for any leaks, cracks, rust marks, etc. It is absolutely necessary to familiarize all household members with the alarm devices used in the installation.

When the alarm is triggered:
- ABSOLUTELY LEAVE THE ROOM WHERE THE ALARM FED
- If possible, open windows and doors (cause "draft") to ventilate the room
- Report the problem to specialized units (fire brigade / gas ambulance)
- If you notice any symptoms of poisoning (e.g. headache) in yourself or any of the household members, contact a doctor

Features of the gas sensor
- High quality semiconductor sensor
- Signaling the alarm with sound and visual indicator
- Built-in function for testing the electronics of the unit and verifying the correct operation of the device and resetting the device in the event of an alarm.
- LED indicators that indicate operation and alarm status.
- Energy saving function
- Highly effective operation
Gas alarm specification
- Power supply: 90 ~ 240V AC
- Sensitivity:
- Power consumption:
- Volume:> 70 dB
- Permissible ambient temperature: -10 ° C ~ 45 ° C
- Permissible ambient humidity: 10% ~ 90% R.H.