Mocolo tempered glass has a surface hardness of 9H, which is why it is extremely resistant to scratches even when in contact with sharp objects (knife, keys). In addition, it is covered with an oleophobic coating, which reduces the amount of fingerprints and other impurities.
This glass model is glued with a liquid substance over the entire surface of the screen and then with the help of a UV lamp the substance is cured. Thanks to this combination, we get the perfect effect of smoothness, clarity and responsiveness on the screen. Installation is easy and acceptable to the user.
Check how to mount: https://www.youtube.com/watch?v=YRI0br1A3Wo&t=800s
* We do not recommend using 3D glass without any housing.
** We do not recommend the use of glass if the housing overlaps too much at the edges of the screen.
Remember to remove and re-add fingerprints after installing the foil/glass on the screen.
The functionality of the fingerprint reader in the screen may be affected by the installed foil/glass coating. The fingerprint reader is not fully developed in this respect.
Glass after dismantling does not leave any trace on the screen.
INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the screen thoroughly and use a dry cloth to polish it to a flash.
3) Tape the speaker with a ribbon.
4) Pour the liquid into the very center of the device.
5) Install the glass as evenly as you can, this step can also be corrected before the surface hardens when the liquid is on the screen along with the glass
4) Using a UV lamp, cure the glass in five places for 15 seconds each.
PRODUCT FEATURES:
- 100% Original
- 0.3mm tempered glass
- Resistance up to 9H
- Do not affect touch sensitivity
- Equipped with nano coating resistant to grease and fingerprints
- Contoured 2.5D edges
- Packed in original packaging
THE SET INCLUDES:
1 x Mocolo Glass
1 x UV Lamp
1 x Installation Tools