Will guide where it is needed

What are the types of guides?
If we stood before choosing a new guide to our saw first we need to check the exact model and brand of our own saw, bar length chain guide groove width and chain pitch. One of the main factors responsible for selection right guide is the selection of the right guide bar mounting tip, because the mounting tips differ in shape, spacing of holes intended for tightening the guide to the saw, and location of the hole intended for lubrication of the cutting system. You can also compare such parameters in the instruction manual attached to the saw old guide with data on the product card of the new guide.
The length of the guide is important
Let's remember one thing guide length it does not indicate the total length of the guide, but only determines the length of the working part of the guide. The length of the mounting tip is not included. Dedra DED87012 slide , it is resistant to deformation and mechanical damage chainsaw part . dedicated for Dedry DED8701, DED8702 chainsaws . With this guide you will achieve better cutting performance and low propensity to bounce. Dedra gives you a guide allowing more intensive use and serving longer than guides from an unknown source. Let's also take care of your chainsaw's proper maintenance. The device must first be cleaned from the outside. Then remove the chain and guide. Chain guide it should not be bent or otherwise damaged. The correct running of the chain and our safety depend on the condition of the guide bar.Specification:
Bar length: 40cm
Guide groove width: 1.3mm