
VID-5 transceiver set for transmission of signals from CCTV cameras. The set consists of a VTX-3 transmitter and a VRX-3 receiver. Below is a description of both items.

VTX-3 transmitter
The device is designed for transmission of audio signal (2 channels) and video from CCTV cameras. VTX-3 works with VRX receivers on the 2.4 GHz band, produced by ME. The transmitter can work on one of four channels in the 2400 MHz band. The channel is selected by changing the position of the switch on the board (channel selected - ON position) after removing the transmitter cover. There is a power light inside the device. The transmitter has a permanently built-in antenna. The range of the link depends on the type of receiving antenna used and can be from 200m to a kilometer. The use of the VRX-3 receiver (also an integrated antenna) enables good transmission up to 300 m.

VRX-3 receiver
The device is designed for transmission of audio signal (2 channels) and video from CCTV cameras. VRX-3 works with VTX 2.4 GHz transmitters, produced by ME. The receiver can work on one of four channels in the 2400 MHz band. The channel is selected by changing the position of the switch on the board (channel selected - ON position) after removing the receiver cover. There is a power light inside the device. The receiver has a built-in antenna (dipole). The range of the link depends on the type of receiving antenna used and can be from 200m to a kilometer. The use of the VTX-3 transmitter (also an integrated antenna) enables good transmission up to 300 m.

Technical Specifications:
- frequency range: 2400 MHz - 2483.5 MHz
- power supply: 11 V - 14 V 150 mA
- video output: 1 Vpp 75 Ω
- audio output: 1 Vpp 1.5 kΩ
- antenna input: 50 Ω
- working temperature: -25 ° C ~ 70 ° C
dimensions: 118x80x36 mm
- modulation: FM (CCIR 405)
- sensitivity: 80 dBm

Included:
- VTX-3 transmitter
- VRX-3 receiver
- Two fastening clips
- Instructions
- Fv or receipt (warranty basis)
