The screwdriver is equipped with a clutch with a 21-position torque adjustment for efficient screwing of various sizes of screws into various materials + dedicated drilling position. And also a two-speed switch changing the speed range of the screwdriver (0-350rpm / 0-1400rpm).

LCD display of the cordless screwdriver
- The device is equipped with an LCD display showing the battery charge status and the operating mode: Screwing (FWD) / Unscrewing (REV).
- In addition, the display has a blue contrast backlight, which makes it easier to read the presented values.

Ergonomics and convenience of using the screwdriver
- The handle is covered with a soft ANTI-SLIP material, thanks to which the device lies firmly in the hand and is comfortable to use. In addition, the comfort of work is increased by the light weight of the 0.966 kg screwdriver with a battery installed.
- Possibility to mount a wrist strap, its use prevents dropping the screwdriver.
- Additionally, on the side of the device there are LEDs indicating the battery charge status.

Lithium-Ion (Li-Ion) batteries
- Lithium-ion batteries do not need to be fully discharged before recharging. With other types of batteries it is not possible, because then their life is shortened due to the so-called memory effect. The Li-Ion battery holds over 80% of its charge for over 90 days when not in use. These types of batteries are 40% lighter and smaller than traditional ones.
- Two batteries included for uninterrupted operation.
Screwdriver LED
The use of LED backlight for better visibility during work will greatly facilitate screwing in and out in poorly lit places.

Application of the cordless screwdriver:
Drilling in ferrous and non-ferrous metals
Fastening door fittings, decorative elements, etc.
Installation of kitchen and bathroom cabinets
Screwing furniture, assembling folding structures, drilling pilot holes
Fixing lighting, electrical sockets, etc.
Embedding wooden and PVC window frames, drilling holes and screwdriving work
Service work
Installation works
Work on the installation of ventilation and air conditioning systems

Technical data of the Powermat screwdriver
Brand: POWERMAT
Model: PM-WA-12V-1.5AT-LCD
Maximum battery voltage: 12V
I gear speed: 0-350rpm
2nd gear speed: 0-1400rpm
Max. torque: 20Nm
Chuck diameter: 10mm
Battery capacity: 1.5Ah
Battery type: lithium-ion
LED lamp
LCD display (shows the working parameters of the screwdriver)
21-stage clutch + drilling
Battery charging time: 3h
Weight of the screwdriver with one battery: 0.966 kg (0.8 kg + 0.166 kg)
Weight of the whole set in the case: 1.95 kg

Accessories for a cordless screwdriver
Cordless screwdriver
2x 1.5Ah / 12V lithium-ion battery
Charger
Set of long bits (2 pcs.)
Short bit set (6 pcs)
Extension for bits (1 pc.)
Set of drill bits (6 pcs)
Transport case
User manual PL