330A IGBT inverter welder with LCD Powermat PM-IMGT-330S

£76.43
This product is not available
Estimated delivery: Fri, Jan 1 - Mon, Jan 4
Availability:
running out
Rating:
Brand:
Powermat
Product code:
PM0765 / 5902565277635
The PM-IMGT-330S model is an inverter welder, the design of which is based on efficient IGBT transistors. It is equipped with an LCD display showing the current welding current, set with the buttons (+/-).
Spawarka inwertorowa IGBT 330A
The IGBT transistor combines the advantages of two types of transistors, the ease of control of field-effect transistors and high breakdown voltage as well
The welder is equipped with a fan cooling the electronics and other components - the "Turbo FAN" function, as well as a thermal sensor that protects the device from overheating.
The device welds with current from 20 to 330A, allows you to weld with an electrode with a diameter of 1.6mm to 4mm. The weight of the welder is only 3.6 kg, which makes it very handy. It also has a carrying strap for easy work at heights.
Welding with a 1.6mm electrode is already possible with a 16A class C slow-blow fuse. Operation with a maximum current of 330A requires a protection of at least 20A.
Spawarka inwertorowa 330A IGBT PM-IMGT-330S LCD
TURBO-FAN fan
Thanks to the use of a large fan in the small housing of the welder, the air flow was increased, which lowered the temperature of the transistors. The device's efficiency is as high as 60%.
Welding current
The welding current can be quickly adjusted in the range of 20-330A. Just press (hold) the + or - button and set the Amperage you want.
Convenient transportation
The small dimensions of the device facilitate transport and welding with the device suspended on the arm.
Spawarka inwertorowa Powermat PM-IMGT-330S
MMA welding
The MMA mode is the electrode welding mode. After setting the appropriate value with the (+/-) button, the display will show the current welding current and, additionally, it will automatically show which electrode to choose for the given current.
VRD function
A voltage reduction system designed to turn the power off within milliseconds after welding is finished. This function is also responsible for reducing the voltage at the stick electrode to a safe level. The VRD function can only be activated for MMA mode by holding the SET button for 5 seconds and deactivated in the same way.
HOT START function
HOT START, commonly known as hot start, enables the welding current to be temporarily increased above the value set by the welder. HOT START works when the arc is struck and is designed to prevent the electrode from sticking to the material. It is a great help when lighting the electrode. To enter the adjustment setting, simply press the SET button until the indicator on this icon appears. The adjustable range of this function is from 0 - 60.
Wymiary spawarki inwertorowej
ARC FORCE function
ARC FORCE stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. Reducing the function values ​​gives a soft arc and a smaller fusion depth, while increasing the function values ​​causes deeper penetration and the possibility of short arc welding. At the highest value for the ARC FORCE function, it is possible to "press the electrode into the molten metal pool and burn the material through. To enter the adjustment setting, just press the SET button until the indicator on this icon appears. The adjustment range of this function is from 0 - 60.
Additionally
The ANTI STICK function cuts / minimizes the welding voltage and current in the event of a short-circuit between the electrode and the material to be welded. ANTI STICK allows the welder to detach the electrode more easily. This function works automatically.
TIG-Lift welding
The welder allows TIG welding. TIG Lift is a method of striking an arc by rubbing it (similar to the MMA electrode ignition).
Powermat PM-IMGT-330S jest spawarką inwertorową
PARAMETERS
Power supply: 230 V / 50 Hz
Idle voltage: 65V
Welding current range: 20-330 [A]
Welding with electrodes in the range: 1.6 - 4.0 [mm]
Power consumption: 7.6 kVA
Rated welding current: 330 A
Rated Duty Cycle: 60%
Welding current at 100% duty cycle: 262 A.
Working voltage: 20.8– 32 [V]
Protection class: F.
Insulation class: IP21S
Power cord: 185 cm
Welder weight: 3.68 kg
EQUIPMENT
Welder
Belt with cufflinks
Mass cable (150 cm)
MMA welding cable (215 cm)
Welding mask
Hammer with a brush
Original packaging
Instruction PL

Specification

In the case of electrical equipment, they are provided with a European plug C, E or F.

Product reviews

This product has no reviews yet.

Sales

Tomek Klimkiewicz Tomek@wasserman.plTomek Wach TomekWach@wasserman.plJakub Józefczyk Jacek@wasserman.pl

Hotline

91 35 08 592From Monday to Friday 08:00 - 16:00
Complaints and returns:Fill in the form

Personal pickup

ul. Strumykowa 15, 72-320 TrzebiatówMonday - Friday 6:00 - 18:00
Saturday 08:00 - 15:00
Bank account number:
Krzysztof Wasilewski Wasserman
Alior Bank
PL85 2490 0005 0000 4530 6714 0206
Logistic partners
  • GLS
  • DHL
Payment methods
  • PayPal
Find us
  • Facebook
  • YouTube
  • Instagram

Wasserman is a company with years of experience operating in the market since 1996. We offer our clients a wide range of products in the field of electronic devices. All products listed on the website are in our warehouses, ready for shipment. We are constantly expanding the range of products available. We are serving individual customers and companies throughout the European Union. We provide professional service to every customer and a fast and smooth order processing. Wasserman - everything for everyone!

All rights reserved Wasserman.eu

Homepage