Quick change of operating mode
The operating mode is selected using a dedicated switch located on the side of the transmission. This allows you to quickly change the function, e.g. from screwdriving mode to drilling or hammer drilling, without having to turn the tightening force adjustment knob to the appropriate position, as in many other screwdrivers available on the market.

A wide range of adjustments
The screwdriver is equipped with a clutch having a 21-position torque adjustment for efficient screwing of different sizes of screws into various materials. And also a two-speed switch changing the speed range of the screwdriver (0-350rpm / 0-1300rpm).
Mechanical shock
Thanks to the impact function, the device can also cope with drilling in concrete and masonry.
Ergonomics and ease of use
The handle is covered with a soft ANTI-SLIP material, thanks to which the device lies firmly in the hand and is comfortable to use. In addition, the comfort of work is increased by the light weight of the 1.4 kg screwdriver with a battery installed.

Lithium-ion batteries (Li-Ion)
Lithium-ion batteries do not need to be fully discharged before recharging. With other types of batteries it is not possible, because then their lifetime is shortened due to the so-called memory effect. The Li-Ion battery holds over 80% of its charge for over 90 days when not in use. These types of batteries are 40% lighter and smaller than traditional ones.
The batteries have a clear charge indicator, activated by pressing a button.
Two batteries in the set ensure uninterrupted operation.
Led
The use of LED backlight for better visibility during work will significantly facilitate screwing in and out in poorly lit places.

TECHNICAL DATA:
Brand: POWERMAT
Model: PM-WA-20V-2AT
Maximum battery voltage: 20V
Hammer drilling function: YES
I gear speed: 0-350rpm
Speeds gear II: 0-1300rpm
Max. torque: 37Nm
Chuck diameter: 13mm
Battery capacity: 2Ah
Battery type: lithium-ion
LED lamp
21-stage clutch
Spindle brake
Weight of the screwdriver with one battery: 1.4 kg (1.0 kg + 0.4 kg)
Weight of the whole set in the suitcase: 2.65 kg

Maximum drilling diameter:
Wood: 25mm
Steel: 10mm
Wall: 10mm
APPLICATION:
Drilling in ferrous and non-ferrous metals
Fastening door fittings, decorative elements, etc.
Installation of kitchen and bathroom cabinets
Screwing furniture, assembling folding structures, drilling pilot holes
Fixing lighting, electrical sockets, etc.
Embedding wooden and PVC window frames, drilling holes and screwdriving work
Service work
Installation works
Work on the installation of ventilation and air conditioning systems

EQUIPMENT:
Cordless screwdriver
2x 2.0Ah / 20V lithium-ion battery
Charger
Bit set (6 pcs)
Extension for bits (1 pc.)
Set of drill bits (6 pcs)
Transport case
User manual PL