A composite of epoxy resins and metal powders, widely used in the repair of worn metal parts, alloys and castings as a result of: corrosion, friction, tearing, cracks, cavitation. It is characterized by a very high coefficient of adhesion and excellent cooperation with metal parts in various temperature conditions. The content of metallic fillers ensures high thermal conductivity and reduces the expansion of the joint. the so-called "liquid metal". it also combines stone, glass, wood, most plastics (except PE, PP, PTFE and silicone rubber). Perfect for joining material combinations, e.g. concrete - iron, hard rubber - iron castings. Protects against corrosion.

Examples of applications are:
- repair of metal parts, filling cavities and welded joints
- sealing of iron and steel castings, non-ferrous metal alloys
- removing leaks in central heating, water and sewage systems
- reconstruction of broken bearing seats, multi-wedges, threads and guides
- embedding metal elements in concrete
- sealing of fuel tanks, heat exchangers (e.g. coolers), oil pans, engine casings
Features:
- safe to use
- excellent thermal conductivity
- combines metals, ceramics, plastics
- for indoor and outdoor use
- for industrial applications
- perfect for metal elements
- allows you to recreate damaged threads and components
- solvent free
- contains powdered light metal alloys
- universal
- resistant to water and temperature
- resistant to aggressive chemical agents
- Gray color
- after drying it can be machined (grinding, drilling, threading)

Directions for use:
- The bonding surfaces should be cleaned mechanically and made rough (sandblasting, grinding, sandpaper, file).
- Remove any dirt and degrease (use Cleaning Kit P-102 or Technical Degreaser P-959).
- Squeeze out the correct amount of components "A" and "B" in a 1: 1 volume ratio and mix thoroughly until a uniform color is obtained.
- Apply the prepared mixture on one of the surfaces.
- Press the elements firmly together and leave immobilized until the adhesive is fully hardened.
Parameters:
- Grey colour
- Pot life after mixing: 30 minutes
- Initial hardening: 135 min. (at 200C)
- Complete hardening: 24 hours
- Shear strength: 12.0 MPa
- Temperature range: -300C to 900C
- Period of validity: 36 months