A very flexible adhesive based on natural rubber. For joining elements made of rubber, coated and rubber-like materials. Creates a strong and flexible joint resistant to changing weather conditions. Rubber Glue is especially recommended for repairing elements made of rubber, coated materials and rubber-like materials.

Typical Application:
- gluing inner tubes
- repair of low-pressure rubber hoses
- repair of pneumatic mattresses
- for repairing elements working on bending
- for gluing elements subject to stretching, e.g. inner tubes
- for indoor and outdoor use; retains its strength parameters

Connecting elements:
- The surfaces to be glued should be free from any dirt (dust, water, grease, etc.). Degrease metal surfaces using the Cleaning Kit P-102 or the Technical Degreaser P-959.
- Apply glue to both surfaces and spread it evenly.
- Wait for the solvents to evaporate (about 10 minutes at 18 ° C).
- Press the glued elements firmly and let them dry completely.
Sealing cracks / holes:
- Cut off the appropriate patch from the attached rubber (size and shape should be selected so that it covers the repaired surface with a minimum allowance of 1 cm).
- Clean the joined surfaces with sandpaper and thoroughly degrease using the Cleaning Kit P-102 or Technical Degreaser P-959.
- Apply glue to both surfaces and spread it evenly.
- Wait for the solvents to evaporate (about 10 minutes at 18 ° C).
- Press the glued elements firmly and let them dry completely.
Features:
- flexible
- stretchy
- resistant to changing weather conditions
- does not contain toluene and cyclohexane
- light brown color
- open drying time 10 min.
- full hardening 12 h
- temperature resistance -30 ° C to 70 ° C
- validity period of 24 months
- safe to use