The ZP-2 wireless system enables wireless control of devices using the ISM 433 MHz bandThe remote control includes 2 separate channels Each channel is controlled by one dedicated input in the transmitterFrom the receiver side, a separate NO/NC relay is assigned to each channelThe maximum load of each relay is 2300 W (AC), making the system suitable for a very wide range of applications.
The ZP-2 set of devices allows you to wirelessly control, for example, lighting, electrically controlled sprinklers, power supply for household appliances, etc. The control of automatic roller shutters or gates can also be used to control the ZP-2/TX transmitter also makes the device ideal for integration with access control and alarm systems, enabling the installation of e.g. door opening buttons, panic buttons or detectors in places where the arrangement of additional wires is difficult or impossible
The system consists of a transmitter and a receiver, but connections in any configuration are possible: (1:1, 1:N, N:1, N:N)A maximum of 128 transmitters can be assigned to each of the receivers, while the number of receivers that can work with one transmitter is limited only by the transmission range
The system allows operation in one of three modes: monostable (the relay is switched on as long as the input in the transmitter is shorted), bistable (a momentary short circuit of the input changes the operating state of the relay) and temporal (a momentary short circuit of the input changes the relay state to a defined time)
Remark! The ZP-2/TX device requires a ZP-2/RX receiver to work together