Manufacturer's code: 10090244The Hillvert immersion pump is suitable for emergency drainage and drying of rooms, ponds, swimming pools or wells. The efficient motor has a power of 800 W. It carries water with a flow rate of 5.5 m3/h. The pumping height is 30 m. The immersion depth of 7 m makes it also suitable for wells. It easily sucks in particles up to 0.5 mm in size. The housing of the device is made of stainless steel, it is resistant to corrosion and dirt. The length of the power cord is 10 m. The pump with float switch allows automatic switching on and off depending on the water level. The lowest possible level to run is 35 mm, it sucks to the level of 11 mm. The pump is suitable for connections: 1'', G1'', 1 1/4'', G1 1/4''.
Product features:
- - High efficiency thanks to the 800 W motor,
- - Made of corrosion-resistant stainless steel,
- - Float switch regulates operation depending on the water level,
- - For pumping water out of wells, ponds, pools, flooded cellars,
- - For connections: 1"; G1'; 1 1/4"; G1 1/4".
- - Model - HT-SP-800W-5500
- - Manufacturer's code - 10090244
- - Product condition - New
- - Voltage [V] - 230
- - Maximum lifting height [m] - 30
- - Power [W] - 800
- - Maximum immersion depth of the pump [m] - 7
- - Maximum water flow [m³/h] - 5,5
- - Maximum working pressure [bar] - 3
- - Power cord [m] - 10
- - Housing material - Stainless steel
- - Maximum water temperature [C] - 35
- - IP rating - IPX8
- - Maximum particle size [mm] - 0.5
- - Diameter of water connection - 1"; G1'; 1 1/4"; G1 1/4"
- - Dimensions (LxWxH) [cm] - 22 x 15 x 34.5
- - Weight [kg] - 7.5
- - Shipping dimensions (LxWxH) [cm] - 23.5 x 18 x 41
- - Shipping weight [kg] - 8.1
- - Submersible pump
- - User Manual