UTP / 2-WIRE CONVERTER SET FOR LAN+POE TRANSMISSION ETH-2WIRE-SET SET OF 2 PCS ATTE

€104.52
Shipping from warehouse: ⁨H7⁩
Estimated shipping: Mon, Apr 22 - Thu, Apr 25
14 days returnUnconditional return policy
Availability:
moderate quantity
Brand:
ATTE
Product code:
ETH-2WIRE-SET / 5902143691280

Specification

Baud::100 Mbps
Case::Plastic (PC)
Connectors::1 pc. RJ45 1 pcs. terminal block (screw terminals) - 0.32 ... 3.3 mm² ( 22 ... 12 AWG )
Dimensions::99 x 24 x 22 mm (single element)
Lan ports::1 pc. RJ45 100 Mbps
Manufacturer / brand::ATTE
Operating temperature::-25 °C ... 65 °C
Power consumption::1.35 W (total)
Power::ETH-2WIRE-TX : 44 ... 56 V DC - PoE 24 ... 56 V DC - Power ETH-2WIRE-RX : 24 ... 56 V - Power The PoE output voltage is equal to the input voltage
Scales::0.03 kg (single element)
Sealing::IP20
Security::Surge Protector - LAN, DATA Reverse Polarity Connection Protection - Power Overload 0.6 A - PoE IN ETH-2WIRE-TX
Selected features::Plug & Play Support for IP Cameras and Network Devices Full Transparency for Networks Operating Modes - Jumper-Adjustable
Signal diodes::Power LAN 2-wire
Terminal block::ETH-2WIRE-TX : PoE IN - Passive PoE ≤ 30 W, PoE (802.3at) ≤ 30 W, PoE (802.3af) ≤ 15 W("+/-": pins 1, 2; "+/-": pins 3, 6) or ("+/-": pins 4, 5; "+/-": pins 7, 8) Power DATA - 2-wire ETH-2WIRE-RX : PoE OUT - Passive PoE("+": pins 4, 5; "-": pins 7, 8) Power DATA - 2-wire
Transmission range::300 m @ 2-wire : UTP, 100 m @ 2-wire : OMY-2X0.75 100 m @ UTP : PoE Switch - ETH-2WIRE-TX 100 m @ UTP : ETH-2WIRE-RX - IP Camera
Warranty::3 years

The ETH-2WIRE-SET consists of transmitter and receiver modules, is used for Ethernet data transmission and PoE power supply using 2 wires, e.g. one pair of UTP twisted pair

The devices enable the installation of cameras or other IP PoE devices in places where the replacement of existing cabling is impossible or unprofitableThe ETH-2wire-TX module is powered from any PoE switch (RJ45 port) and then via 2 wires, enables two-way network communication and power supply to the ETH-2wire-RX moduleThe camera or other PoE receiver can be connected to the RJ45 port of the ETH-2wire-RX module at the end of the lineThe devices can optionally be powered from POWER screw connectors

Depending on the selected mode of operation of the converters, the power supply of them and the devices connected to them can be implemented in several waysPoE power supply or from an external power supply, both from the side of the ETH-2wire-TX transmitter and the ETH-2wire-RX receiver (configuration using jumpers)

Despite our best efforts, we cannot guarantee that the published technical data and photos do not contain inaccuracies or errors, which, however, cannot be a basis for claims.

Homepage