Manufacturer no: 10021222
Stamos Germany plasma cutter will work well in car workshops, metalworking companies, as well as among DIY enthusiasts. It perfectly copes with steel, stainless steel, cast iron, copper, nickel, titanium or aluminum. The device is precise and does not cause deformation. The cutting current is set by means of a knob in the range of 20-45 A. The LED display allows you to monitor selected parameters. With a duty cycle of 100%, 20 A is possible. This is enough to cut parts up to 15 mm thick. The device has 2 operating modes, in 2T mode the burner works as long as the switch is pressed, in 4T mode you should touch once to turn on the burner and touch again to turn it off. The burner ignites at a high frequency, which will allow to separate the grilles and grate. The air supply for 10 s prevents oxidation and deformation of the object. As the air continues to flow, the burner cools to prevent damage. Powerful fan prevents overheating. The steel housing protects the components and protects them from environmental influences. The handle helps in safe transport.
Product features:
- - Modern IGBT inverter and HF ignition,
- - Maximum cutting current 45 A, duty cycle 100% at 20 A,
- - Control panel with LED display and knob,
- - Cutting without deformation up to 15 mm of material thickness even in the mesh thanks to pilot ignition,
- - Easy change between work 2 and 4 - tact.
- - Model - S-PLASMA 50-IGBT
- - Catalogue number -10021222
- - Article status - New
- - Voltage [V] - 230
- - Plasma ignition - HF
- - Efficiency (at rated conditions) [%] - 83
- - Case cooling - Fan
- - Plasma cable [m] - 4,6
- - Duty cycle [%] - 30
- -Max. cutting current [A] - 45
- - Min. cutting current [A] - 20
- - Working air pressure [bar] - 3,5-5,5
- - Power cord [m] - 2,5
- - Rated input power [kVA] - 4,5
- - Ground cable [m] - 3
- - Power factor - 0,62
- - Cutting width [mm] - 1,5
- - Handle cooling - Air
- - Gas outflow time after welding [s] - 10
- - Maximum input power [kVA] - 10
- - Insulation class - H
- - Compliance with standards - EN60974-1
- - Maximum input current [A] - 35
- - IP rating - IP21S
- - Rated input current [A] - 20
- -Max. cutting thickness [mm] - 15
- - Idle voltage [V] - 300
- - Welding cycle current 60% [A] - 30
- - Welding cycle current 100% [A] - 20
- - CNC - No
- - Water cooling - No
- - Dimensions (LxWxH) [cm] - 49,5 x 16,5 x 33
- - Weight [kg] - 10
- - Shipping dimensions (LxWxH) [cm] - 65 x 27 x 39
- - Shipping weight [kg] - 11,4
- - Beach cutter
- - Plasma torch with hose package (4.5 m)
- - Ground cable (3m)
- - Power cable (2.5 m)
- - Pressure reducer
- -Manual