S-PLASMA 50STAMOS GERMANY maximum cutting current 50 Ainverter technology V-MOSFET93% working efficiencyoptimal electricity consumption low risk of burnoutProduct features:
- - Functionality - for cutting steel and other electrically conductive metals (titanium, copper, brass , etc.)
- - Efficiency - modern V-MOSFET technology provides a working efficiency of 93% and precise and safe cutting,
- - Simple operation - a large knob allows you to precisely determine the cutting current, without having to remove gloves,
- - Readability - LED display shows current intensity even in dark rooms,
- - Easy transport - convenient handle, small size and weight allow you to easily move the cutter according to your needs,
- - Convenience - long 4-meter wires guarantee freedom of movement during cutting and facilitate work in hard-to-reach places,
- - Strength - powder coated sheet metal housing is resistant to mechanical damage.
- - Model - S-PLASMA 50
- - Catalog number - 2007
- - Article status - New
- - Voltage - 230 V / 50 Hz
- - Rated input current - 20 A
- - Maximum input current - 27 A
- - Rated input power - 4,3 kVA
- - Maximum input power - 5.8 kVA
- - Idle voltage - 230 V
- - Cutting current - 20 - 50 A
- - Rated duty cycle - 60%
- - Cutting current in the duty cycle 100% - 38 A
- - Duty cycle cutting current 60% - 50 A
- - Maximum cutting thickness - 14 mm
- - Cutting width - 1 mm
- - Required air flow - 100 l/min
- - Air pressure - 4.5 bar
- - Plasma cutting handle - 4 m
- - Ground wire with clamp - 3.6 m
- - Power cable - 1.5 m
- - Chassis cooling - Fan
- - Method of cooling the handle - Gas
- - Insulation class - F
- - Degree of protection - IP20S
- - Construction according to - EN 60974-1; EN 60974-10
- - EG - CE compliant
- - PT-31 plasma cutting bracket - SKU No.: 19000403
- - Avg. plasma cutting bracket connectors - 16 mm
- - Accessories suitable for PT-31 - SKU: 10020031
- - Avg. ground wire connectors - 9 mm
- - Dimensions (LxWxH) - 16.5 x 37 x 28 cm
- - Weight - 10.7 kg
- - Shipping dimensions (LxWxH) - 51 x 28.5 x 39 cm
- - Shipping weight - 12.8 kg
- Plasma cutting - thanks to the current up to 50 A, the device will easily cut metals such as iron, stainless steel, cast iron, copper or aluminum. The gas pressure is infinitely adjustable, which allows for precise control of the plasma jet. Non-burning of the material, a small amount of distortion and a smooth cutting gap are some of the advantages of using the Stamos Germany multifunction device.
- - 2T, or two-stroke. When using this mode , pressing the button will initiate the cut, and releasing it interrupts this process.
- - Plasma cutter
- - Ground wire with clamp – 4.3 m
- - Cutting bracket with cable – 4.2 m
- - Air hose
- - Pressure reducer
- - Pressure gauge
- - Trolley for easy grip handling
- - Collet
- - Ring
- - Manual EN