Engine Redox Brushless 400/1400
The classic Redox 400/1400 outrunner is the faster of the two available "400" from our range. Offering approx. 400 g. of static thrust, the high-speed unit with 1400 kV will be ideal for maneuverable and fast acrobats weighing up to approx. 550-600 g., giving excellent opportunities for 3D flights and rapid evolutions. It will also be suitable for any of these models, where the pilot would like to get a little more cruising speed, even from high-wing or other training models.
In addition, the engine has the ability to move the shaft to the other side of the body, thus obtaining the option of "reverse assembly" - this can be especially helpful in models with a limited possibility of mounting the frame for the installation of the engine at the front of the model or be an ideal solution in models with push drive.
The set includes:
- redox brushless motor
- Small mounting bed with 4 screws
- 3x banana connector - socket
- 3x heat shrink sleeve
Technical data:
Scales:
35.5 g
Diameter:
28.0 mm
Connectors:
3.5 mm
Operating voltage:
7.4 - 11.1 V / (3 LiPo)
Speed/Volt [RPM/V]:
1400
Shaft diameter:
3.0 mm
Proper current consumption:
0.5 A
Housing length:
25.9 mm
Power:
120 watts (Printing)
Recommended propellers:
8x4 - 9x5
Max. Efficiency:
75 %
Shaft length:
40.0 mm
Regulator:
18 A
Static string:
400 g
Additional connectors:
3 x 3.5 mm + covers
Bed:
handguard X 40mm + screws
Max. power consumption:
15.5 A