S-MIG 350CThe efficient MIG MAG welding machine (migomat) of the German brandThe welding machine's operating cycle is within 60% with an efficiency of up to 93% and a welding current of 350 A.The user can change the wire feed rate and choose between two- and four-stroke. Features:
- - Efficiency - IGBT inverter technology makes it possible to achieve high efficiency with low failure rate,
- - Safety - efficient fan ensures cooling of the machine,
- - Versatility - the possibility of welding using the MIG and MAG methods, which allows you to weld different types of metals,
- - Convenience - long MMA, TIG and bulk cables, increase the range and comfort of work, especially when reaching hard-to-reach places,
- - Mobility - comfortable handles make it easy to carry,
- - Intuitiveness - clear control panel equipped with display and LED indicators,
- - Multi-functionality - 2T, 4T, Hot Start, Arc-Force, Anti Stick, Spatter and more.
- - Model - S-MIG 350C
- - Article status - New
- - Catalogue number - 2080
- - Input voltage - 400 V, 3-phase
- - Frequency - 50 Hz
- - Functions - MIG / MMA
- - Input current - 15.6 A / 21 A
- - Maximum input power - 12.8 kVA / 13.8 kVA
- - Rated output current - 50 – 350 A / 50 – 330 A
- - Output voltage - 16.5 – 31.5 V / 22 – 33.2 V
- - Load duration - 60%
- - Power factor - 0.93
- - Efficiency - 85%
- - Wire feed type - Separate (4 rolls)
- - Wire feed rate - 2.5 – 16 m/min
- - Falling time - 1 s
- - Welding wire magazine diameter - 270 mm
- - Welding wire diameter - 0.8 / 1.0 / 1.2 mm
- - Protection class - IP23
- - Insulation class - F
- - MIG holder - 4 m
- - MMA handle - 4 m
- - Ground wire - 4 m
- - Dimensions (LxWxH) - 64 x 26.5 x 47.5 cm
- - Weight - 30.5 kg
- - Shipping dimensions (LxWxH) - 75 x 38 x 51 cm
- - Shipping weight - 55 kg
- - 2T/4T, i.e. two-bar and four-bar. When using the first of them, pressing the button will initiate welding, and letting go of it interrupts this process. In the case of a four-stroke, the user does not have to hold the buttons constantly, because pressing and releasing the button starts or ends welding,
- - Hot Start consists in a temporary increase in the welding current during arc ignition,
- - Anti-Stick , thanks to minimizing voltage and current, facilitates the detachment of the electrode from the material,
- - Arc Force allows short arc welding with an increase in current value,
- - Spatter - changing the level of inductance allows you to reduce the number of chips.
- - Welding machine,
- - MMA welding chuck with a wire length of 4 m,
- - MIG/MAG welding chuck with 4 m long cable ,
- - Ground wire with clamp.