Inverter welding machine IGBT TIG MMA 2T/4T ARC-Force Anti Stick 200A Stamos Germany

This product is not available
Availability:
expected delivery
Brand:
Stamos Germany
Product code:
10020161 / 4250928642295

Specification

Sku:1007146
S-WIG 200 IGBTMulfunctional TIG inverter welding machine and MMAdvertical welding current regulation (max 200 A) IGBT inverter technologyhigh degree of trouble-free efficient operation and fast switching between functions is resistant to short circuitsProductive features:
  • - Versatility - the possibility of welding in TIG and MMA modes ,
  • - Practicality - suitable for machining elements made of various weldable metals,
  • - Efficiency - the use of modern IGBT technology guarantees precise work and safety against short circuits,
  • - Legibility - the controls allow you to check the operation of the device,
  • - Convenience - long 3 and 4-meter wires allow you to work freely and reach hard-to-reach places,
  • - Mobility - convenient handle makes it easy to carry the welding machine,
  • - Multi-functionality - Current Down Slope, 2T/4T, Hot Start, Arc-Force, Anti Stick, Non-contact arc ignition, Gas outflow before welding
STAMOS devices have been made according to strict European standards and have passed tests for compliance with CE and RoHS. This guarantees a long service life and high quality of the device. Technical parameters:
  • - Model - S-WIG 200 IGBT
  • - Catalogue number - 2161
  • - Article status - New
  • - Power supply - 230 V / 50 Hz
  • - Rated input current - TIG 15.7 A / MMA 16 A
  • - Maximum input current - TIG 26.5 A / MMA 35.7 A
  • - Rated input power - TIG 6.1 kVA / MMA 8.2 kVA
  • - Maximum input power - 8.3 kVA
  • - Idle voltage - 59 V
  • - Current TIG DC - 10 - 200 A
  • - Current MMA - 10 - 180 A
  • - Welding current in the duty cycle 100% - TIG 118 A / MMA 80 A
  • - Welding current in the duty cycle 60% - TIG 152 A / MMA 103 A
  • - Welding current in the duty cycle 35% - TIG 200 A
  • - Welding current in the duty cycle 20% - MMA 180 A
  • - Gas discharge before welding - 0.5 s
  • - Descent current - 1 - 10 s
  • - Gas outflow - 1 - 15 s
  • - Cooling - Fan
  • - TIG arc ignition - Non-contact
  • - Hot Start - Yes
  • - Arc Force - Yes
  • - Anti Stick - Yes
  • - 2T/4T - Yes
  • - Solenoid valve - Yes
  • - Fan - Yes
  • - Efficiency - ≥85%
  • - Power factor - 0.7
  • - Insulation class - F
  • - Diameter of TIG electrodes - 1.6, 2.4, 3.2 mm
  • - Electrode diameter MMA - 1.6 - 5.0 mm
  • - Degree of protection - IP21S
  • - MMA handle - 3 m
  • - TIG handle - 4 m
  • - Ground cable - 3 m
  • - Power cord - 2.2 m
  • - Dimensions (LxWxH) - 41.00 x 14.00 x 29.00 cm
  • - Weight - 6,00 kg
  • - Shipping dimensions (LxWxH) - 49.00 x 25.00 x 36.00 cm
  • - Shipping weight - 11,50 kg
Working methods
  • MMA (coated electrode) – it will work indoors and outdoors. It does not require shielding gas and is suitable for welding thin materials (from a thickness of 1.5 mm), e.g. copper, iron, nickel, aluminum or alloys m.in steel and cast iron. Welds made by this method have good operational and mechanical values.
  • TIG – copes well with combining metals and their alloys, e.g. copper, aluminum, magnesium, nickel, titanium, steel and many others. It will work particularly well when machining very thin materials (with a thickness of 0.5 mm). This method can be used in any position – horizontal, vertical, flat and above the head, and its effect is a clean and precise weld that does not corrode.
Features:
  • - 2T/4T, i.e. two-bar and four-bar. When using the first of them, pressing the button will initiate welding, and letting go of it interrupts this process. In the case of a four-stroke, the user does not have to hold the buttons constantly, because pressing and releasing the button starts or ends welding,
  • - Hot Start consists in a temporary increase in the welding current during arc ignition,
  • - Anti-Stick , thanks to minimizing voltage and current, facilitates the detachment of the electrode from the material,
  • - Arc Force allows short arc welding with an increase in current value,
  • - Current Down Slope - the time when the value of the output current decreases from the value of the welding current to the value of the final current.
  • - Non-contact HF arc ignition (High Frequency Ignition) allows you to start welding without contact of the electrode with the material being processed, which reduces the risk of tungsten contamination of the weld and facilitates precise welding,
  • - Gas Post-Flow Time, i.e. regulation of gas outflow. Prevents oxidation of the welding pool,
Included:
  • - Welding machine
  • - TIG handle with a length of 4 m
  • - MMA holder with a length of 3 m
  • - Ground cable with 3 m long clamp
  • - Bushings – 2.4 and 3.2 mm
  • - Ceramic nozzles – 5, 6 and 7 mm
  • - Long cap
  • - Housing clamping sleeve
  • - Manual EN

Despite our best efforts, we cannot guarantee that the published technical data and photos do not contain inaccuracies or errors, which, however, cannot be a basis for claims.

Contact

Personal pickup

ul. Strumykowa 15, 72-320 TrzebiatówMonday - Friday 8:00 - 16:00
Saturday 10:00 - 14:00
Bank account number:
Krzysztof Wasilewski Wasserman
IBAN: LT083250030640087840
BIC/SWIFT: REVOLT21
Logistic partners
  • GLS
  • DHL
Payment methods
  • Stripe
  • PayPal
Find us

Wasserman is a company with years of experience operating in the market since 1996. We offer our clients a wide range of products in the field of electronic devices. All products listed on the website are in our warehouses, ready for shipment. We are constantly expanding the range of products available. We are serving individual customers and companies throughout the European Union. We provide professional service to every customer and a fast and smooth order processing. Wasserman - everything for everyone!

All rights reserved Wasserman.eu

Homepage

We use cookies so the site is working properly.