S-MULTI 195 IGBTMulti-functional semi-automatic weldingMIG, MAG, FCAW, TIG and MMAdvertical welding current regulation (max 195 A) IGBT inverter technologyhigh degree of trouble-free efficient operation and fast switching between functions is resistant to short circuitsProduct characteristics:
- - Versatility - the possibility of welding in MIG, MAG, FCAW, TIG and MMA modes ,
- - Practicality - suitable for machining elements made of various weldable metals,
- - Efficiency - the use of modern IGBT technology guarantees precise work and safety against short circuits,
- - Readability - two LED displays and indicators allow you to check the operation of the device,
- - Convenience - long 3 and 4-meter wires allow you to work freely and reach hard-to-reach places,
- - Mobility - convenient handle makes it easy to carry the welding machine,
- - Multi-functionality - Current Down Slope, 2T/4T, Hot Start, Arc-Force, Anti Stick, Spatter, VRD
- - Model - S-MULTI 195 IGBT
- - Catalogue number - 2162
- - Article status - New
- - Rated input voltage - 230 V / 50 Hz
- - Rated input current - 15.2 A (MIG) / 15 A (TIG) / 15.3 A (MMA)
- - Max. input current - 33.9 A (MIG) / 25.4 A (TIG) / 39.6 A (MMA)
- - Rated input power - 9,1 kVA
- - Maximum input power - 9.7 kVA
- - Idle voltage - 50 V
- - Welding current MIG - 30 \u2012 195 A
- - Welding current TIG - 10 \u2012 195 A
- - Welding current MMA - 10 \u2012 195 A
- - Welding current in the duty cycle 100% - 87 A (MIG) / 115 A (TIG) / 76 A (MMA)
- - Duty cycle welding current 60% - 112 A (MIG) / 148 A (TIG) / 98 A (MMA)
- - Welding current in the duty cycle 35% - 195 A (TIG)
- - Welding current in the duty cycle 20% - 195 A (MIG)
- - Welding current in the duty cycle 15% - 195 A (MMA)
- - Chassis cooling - Fan
- - Gas solenoid valve - Yes
- - Efficiency - ≥85%
- - Power factor - 0.7
- - Insulation class - F
- - Degree of protection - IP21S
- - TIG electrode diameter - 1.6, 2.4, 3.2 mm
- - Electrode diameter MMA - 1.6 – 5.0 mm
- - Cable length with MIG holder - 3 m
- - Cable length with MMA holder - 4 m
- - Cable length with TIG holder - 4 m
- - Ground wire length - 3 m
- - Power cord length - 2.7 m
- - Dimensions (LxWxH) - 55.00 x 19.50 x 37.50 cm
- - Weight - 20,60 kg
- - Shipping dimensions (LxWxH) - 58.50 x 31.00 x 42.50 cm
- - Shipping weight - 22,80 kg
- MIG/MAG - With the MIG method, stainless steel, tin, copper and other non-ferrous metals can be conveniently bonded, while the MAG mode will work when welding low-alloy, high-alloy or structural non-alloy steels
- MMA (coated electrode) – it will work indoors and outdoors. It does not require shielding gas and is suitable for welding thin materials (from a thickness of 1.5 mm), e.g. copper, iron, nickel, aluminum or alloys m.in steel and cast iron. Welds made by this method have good operational and mechanical values.
- TIG – copes well with combining metals and their alloys, e.g. copper, aluminum, magnesium, nickel, titanium, steel and many others. It will work particularly well when machining very thin materials (with a thickness of 0.5 mm). This method can be used in any position – horizontal, vertical, flat and above the head, and its effect is a clean and precise weld that does not corrode.
- FCAW (arc welding with core wire) - a method that does not require the use of shielding gas. Thanks to this, it will work well when working outdoors, in windy places. This mode is characterized by a large depth of melting.
- - 2T/4T, i.e. two-bar and four-bar. When using the first of them, pressing the button will initiate welding, and letting go of it interrupts this process. In the case of a four-stroke, the user does not have to hold the buttons constantly, because pressing and releasing the button starts or ends welding,
- - Hot Start consists in a temporary increase in the welding current during arc ignition,
- - Anti-Stick , thanks to minimizing voltage and current, facilitates the detachment of the electrode from the material,
- - Arc Force allows short arc welding with an increase in current value,
- - Current Down Slope - the time when the value of the output current decreases from the value of the welding current to the value of the final current.
- - Voltage Reduction Device (VRD) ensures safety when welding with an electrode wrapped in damp places.
- - Welding machine
- - TIG holder with cable – 4 m
- - MIG holder with cable – 3 m
- - MMA holder with cable – 4 m
- - Ground wire with clamp – 3 m
- - Collets – 1,6; 3.2 mm
- - Clamping sleeve in the housing – 1 pc.
- - Ceramic nozzles – 4, 5, 6 and 7 mm
- - Long cap – 1 pc.
- - Short cap – 1 pc.
- - Fastening rings – 2 pcs.
- - Manual EN