This is not an equipment for little boys


Welding with a 1.6mm electrode is already possible with a 16A class C slow-blow fuse. Operation with a maximum current of 300A requires a protection of at least 20A. Thanks to welder has standard copper EURO connectors welding cables you can easily select additional replacement welding cables.


ARC FORCE stabilizes the arc regardless of its length, regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller penetration depth, and by increasing the value of the function, it causes deeper penetration and the possibility of welding with a short arc. With the highest value for the function ARC FORCE it is possible to press the electrode into the molten metal and burn through the material. (In this model, the ARC FORCE function is automatically adjusted)

"Turbo FAN" - fan cooling the electronics and other components as well as a thermal sensor protecting the device against overheating.

EQUIPMENT
welder
belt with cufflinks
mass cable (120cm)
welding cable (210cm)
welding mask
hammer with a brush
original packaging
instruction PL

PARAMETERS:
Power supply: 230V / 50Hz
Idle voltage: 65V
Welding current range: 20-300A
Welding with electrodes in the range: 1.6 - 4.0 mm
Power consumption: 7.8kVA
Rated welding current: 300A
Rated Duty Cycle: 60%
Welding current at 100% duty cycle: 237A
Working voltage: 20.8– 31.2V
Protection class: F.
Insulation class: IP21S
Power cord: 195cm
Weight: 5.5 kg

Discover the advantages of the PM-MMA-300ST welder
Model PM-MMA-300ST this inverter welding machine, whose design is based on efficient IGBT transistors. It is equipped with an LCD display that shows the current welding current. The same current can be set with a knob with smooth regulation. Such IGBTs combine the advantages of two types of transistors; Ease of control of field effect transistors and high breakdown voltage and switching speed of bipolar transistors. The device is welding current from 20 to 300A, it allows for electrode welding 1.6mm to 4mm in diameter.
Welding with a 1.6mm electrode is already possible with a 16A class C slow-blow fuse. Operation with a maximum current of 300A requires a protection of at least 20A. Thanks to welder has standard copper EURO connectors welding cables you can easily select additional replacement welding cables.

The small dimensions of the device enable easy transport of the welding machine
The main thing welding machine functions ; HOT START - hot start, allows for temporary current boost welding above the value set by the welder. It works when the arc is struck to prevent the electrode from sticking to the material. This is a great convenience when lighting the electrode. ANTI STICK cuts off or minimizes welding voltage and current in the event of a short-circuit between the electrode and the material to be welded. This function is a great convenience for the welder, it allows him to detach the electrode more easily.
ARC FORCE stabilizes the arc regardless of its length, regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller penetration depth, and by increasing the value of the function, it causes deeper penetration and the possibility of welding with a short arc. With the highest value for the function ARC FORCE it is possible to press the electrode into the molten metal and burn through the material. (In this model, the ARC FORCE function is automatically adjusted)

"Turbo FAN" - fan cooling the electronics and other components as well as a thermal sensor protecting the device against overheating.

EQUIPMENT
welder
belt with cufflinks
mass cable (120cm)
welding cable (210cm)
welding mask
hammer with a brush
original packaging
instruction PL

PARAMETERS:
Power supply: 230V / 50Hz
Idle voltage: 65V
Welding current range: 20-300A
Welding with electrodes in the range: 1.6 - 4.0 mm
Power consumption: 7.8kVA
Rated welding current: 300A
Rated Duty Cycle: 60%
Welding current at 100% duty cycle: 237A
Working voltage: 20.8– 31.2V
Protection class: F.
Insulation class: IP21S
Power cord: 195cm
Weight: 5.5 kg