Hikvision DS-2CD1341-I ceiling camera is dedicated to work in monitoring systems based on IP recorders. It is equipped with a 1/3 "CMOS sensor with a resolution of 4 Mpix and an infrared illuminator with a range of up to 30 m, ensuring correct visibility in the absence of lighting. It has a lens with a fixed focal length of 2.8 mm and a viewing angle of 98 °. The housing with high IP67 rating provides protection electronics against adverse weather conditions The camera can be powered by conventional DC 12 V or PoE (802.3af compliant).

Special features:
- 4 MPix resolution - 2688 x 1520
- 2.8 mm / 98 ° lens
- H.264 + / H.264 / MJPEG compression
- image functions: 3D-DNR, DWDR, BLC
- access via Ezviz, Hik-Connect
- ROI area of interest
- mechanical infrared filter
- IP67 enclosure tightness class
- DC 12 V or PoE supply (802.3af)

The camera has several compression methods implemented: H.264 +, H.264, MJPEG. H.264 + is a compression developed by Hikvision, based on H.264, optimized for work in CCTV monitoring systems. Its use allows on average to reduce by 50% the data stream compared to H.264, which is associated with lower demand for bandwidth and disk capacity. The camera can be used to build monitoring based on recorders supporting both H.264 and H.264 + (series of E, K, I recorders).

The above model belongs to the new EasyIP Lite camera series, characterized by good image quality and low price. Basic alarm events such as motion detection and image tampering are available in EasyIP Lite. Cameras in this series also have the ability to set the corridor mode and specify one area of interest ROI.

A free service called Hik-Connect is available for the device, enabling full remote access to the camera / recorder in the case of a variable IP address or using a domain address via a web browser. To use it, you must create a Hik-Connect account and add a device to it. The service allows connection via www, application on a PC or smartphone.


Ezviz (EasyVision) is a free service that allows you to access the camera image preview via the Internet without having to forward the ports on the router. To enable remote access, all you need to do is connect the device to the network (a valid IP address and properly set gateway are required). Then go to the website www.ezviz7.com and set up an account there. The account can be linked to monitoring devices located in a given local network (they must have the Ezviz service active). The paired devices will be available from anywhere on the Internet.

SADP (Search Active Device Protocol) is a free and easy-to-use software designed for searching Hikvision cameras and recorders in the local network, modifying network parameters and restoring passwords. Detailed information on restoring passwords (point 8) and operating the program can be found in the library SADP application - a tool for organizing CCTV systems based on HIKVISION devices in a local network .
