Very powerful 2.4GHz wifi base set. Designed for particularly difficult conditions. It allows efficient operation both in built-up areas and in buildings through walls. Tested by us in many very unfavorable situations, definitely the best solution for the base station we've managed to put together. Of course, there are curtains that no 2.4GHz transmitter can beat, but this one definitely has the best chance.
The kit includes the SAG 2408-R2 antenna, Bullet Ubiquiti M2 HP and Poe power supply. The antenna is integrated with the bullet and has a mount to the mast (pipe). Poe power supply allows you to power on the network cable. You do not need to buy anything other than the network cable needed to connect to the main router. The parameters of the components below.
Ubiquiti BULLET M2 HP 2.4GHz, 1000mW
It supports the 802.11n standard. High power up to 30dBm. Real bandwidth of 100Mbps +
|processor||Atheros MIPS 24KC, 400MHz|
|Memory||32MB SDRAM, 8MB Flash|
|Ethernet interface||1 X 10/100 BASE-TX (Cat. 5, RJ-45)|
|certification||FCC Part 15.247, IC RS210, CE|
|Maximum RF output power (TX Power)||up to 30dBm|
|Power||PoE (Passive Power over Ethernet - pairs 4.5+; 7.8 return)|
|Working temperature||-30C to + 75C|
|Antenna connector||N-male (Male Jack - connected directly to the antenna)|
Omni-directional antenna ProEter 7 mini 2.4GHz 7 dbi
Omnidirectional antenna with vertical polarization and energy gain of 7 dBi, designed to work in the 2.4 GHz band.
Ubiquiti 24V 0.5A UBNT PoE power adapter
PoE adapter for 24 V powered equipment (e.g. RouterBoard, Alix, WispStation, Bullet and others). Ideal for powering CPE client stations and base stations. The adapter has a LED indicating power and LAN. Original Ubiquiti product.