The multiswitch is intended for the expansion of the internal antenna installation of the Full HD and SD terrestrial satellite and terrestrial television system.

The device allows you to receive programs from two satellites and connect to 4 satellite tuners. Gold-plated sockets significantly reduce the loss of signal at the antenna cable connection, and the lack of oxidation. The Multiswitch automatically recognizes the type of signal that will be transmitted to the tuners. satellite antenna with a diameter of not less than 0.8 m and Quatro converters, and a terrestrial TV antenna. Separation of the Sat and TV signal coming from the multiswitch is done by means of end subscriber sockets. Quatro converters and subscriber sockets are available in our store. The multiswitch is powered by through an external power supply, thus eliminating the phenomenon of increased operating temperature, which is a frequent cause of damage to the device. and a proper ventilation against unauthorized access

Technical data:
- SAT frequency range: 950-2200 MHz
- TER frequency range: 47-862 MHz
- SAT gain (950-2150 MHz): 2 dB
- TER gain (47-862 MHz): 4 dB
- SAT to TER separation: 28 dB
- TER to SAT separation: 30 dB
- Separation between H / V polarities: 25 dB
- Maximum SAT output level: 101 dBuV
- TER maximum output level: 85 dBuV
- Input / output impedance: 75 Ohm
- Polarization / band switching: 13V / 18V 13V / 22kHz-18V / 22kHz DiSEqC 2.0
- Mains power: 230V AC 50Hz
- Working temperature: 0 ... + 55 oC
- Dimensions: 155 x 133 x 54 mm