AntenaBox 2.4GHz TP-Link TL-WR743ND PoE WISP client

withdrawn from the offer
Shipping time:
24 hours
(Based on 0 reviews)
Product code:

 Complete wifi point with Tp Link TL-WR743ND wisp router, 14dbi antenna, power supply and PoE. Everything in a hermetic box with cable gland for UTP cable and pipe / mast mount. The perfect solution for a client with WISP, i.e. with the possibility of creating a subnet. Perfect solutions also for 2.4GHz bridges.

The proven Tp Link TL-WR743ND router allows you to create a subnet and connect multiple computers to one antenna. The whole router will fit easily into the housing, however, due to possible overheating, we recommend installing the antenna of the router's internal module without its own plastic housing. Power is supplied by means of modules included in the set in PoE technology (Power Over Ethernet) that allows the use of existing Ethernet cable wires to power the device. A complete station ready for installation directly on the mast. A gland on the bottom of the housing protects the housing from moisture ingress through the Ethernet cable. The ideal solution in urban conditions. In our network, we have connected clients using these sets within a radius of 3km from the transmitter.

The kit includes three basic elements described below:

1 - Antenna Box

 Sealed casing with 2.4GHz 14dbi antenna, RP connector with mast mounting, internal fixing kit.

- Antenna type - Panel
 - Frequency range 2400-2500MHz
 - Profit 14dBi VSWR & 1.5;
 - 50Ohm impedance
 - Vertical or horizontal polarization
 - Working temperature -20 +60
 - Internal dimensions 169x169mm
 - External dimensions 200x200x73mm
 - IP66 rated
 - Mast attachment diameter 30-50mm

2 - Tp Link TL-WR743G router with power supply

Perfect for a fast WISP + PoE client. Detailed description on the producer's website - CLICK HERE

The TL-WR743ND WiFi router combines the functions of a router, access point and firewall. It allows you to easily and securely share Internet access and files. The device complies with 802.11b / g / n standards which allows data transfer rates of up to 150 Mbps. The security of wireless data is supervised by a number of encryption standards, including the most secure - WPA-AES (WPA2). The device has support for QoS so that it is possible to set priorities for individual services to improve the quality of VoIP calls or eliminate delays in network games. The device is easy to configure via a web page embedded in the router. The box contains the Installation Instructions - which, even for an inexperienced user, will guide you step by step through the entire installation process. Additionally equipped with the option of power over PoE (power via Ethernet cable) eliminating the need to pull an additional power cable to the device.

The most important features:
 - Wireless transfer up to 150Mbps
 - WISP mode support, allowing connection sharing wirelessly or via cable
 - PoE power supply up to 30 meters, PoE adapter included
 - Easy encryption enabled thanks to the QSS button
 - QoS queues based on IP address
 - Built-in NAT and DHCP services
 - Support for dynamic and static IP address allocation mechanisms, L2TP, PPTP protocol, and BigPond Cable Internet access
 - Virtual server support, DMZ hosts, UPnP protocol, DDNS, static routing and VPN pass-through connections
 - WEP, WPA / WPA2, WPA-PSK / WPA2-PSK data encryption (TKIP / AES)
 - Backup, restore settings, firmware update
 - Compatibility with all devices operating in the IEEE 802.11n / b / g standard
 - Parental control function
 - Built-in firewall
 - Speed ​​control of each LAN port
- Detachable antenna, allowing the installation of a more powerful antenna (RP-SMA connector)

 Includes power supply.

standards IEEE 802.11g, IEEE 802.11b, partial support of the N standard
Baud rates 11n: Up to 150Mbps (dynamic)
 11g: Up to 54Mbps (dynamic)
 11b: Up to 11Mbps (dynamic)
Frequency 2.4-2.4835GHz
Modes of operation AP Client Router / AP Router
encryption 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Maximum transmission power (MAX) 20dBm (Max. EIRP)
tenderness 130M: -68dBm @ 10% PER
 108M: -68dBm @ 10% PER
 54M: -68dBm @ 10% PER
 11M: -85dBm @ 8% PER
 6M: -88dBm @ 10% PER
 1M: -90dBm @ 8% PER
ports 4 * 10 / 100Mbps LAN Port
 1 * 10 / 100Mbps WAN Port
 (Support Passive PoE)
Antenna Omnidirectional omnidirectional antenna with 5dBi gain
External power supply 9VDC / 0.85A
Working temperature 0oC ~ 40oC (32oF ~ 104oF)
Storage temperature -40 ° C ~ 70 ° C (-40oF ~ 158oF)
Humidity of work 10% 90%, no condensation
Storage humidity 5% ~ 95% non-condensing
dimensions 174 x 111x 30mm

3 - PoE power supply module

Power over Ethernet adapter designed to power devices that are not factory-set for PoE. Such devices include most SOHO devices (access points routers), which are powered by an external power supply as standard. The adapter is especially useful in places where there is a problem with power supply (roofs, chimneys etc.). It supplies power via an Ethernet cable.

Product reviews

This product has no reviews added yet.