CORDLESS IMPACT WRENCH 3/8'' XR 18V 0*AH

Technical Specifications

Power Type: Rechargeable
Battery Type:Li-Ion 18V XR
Number of batteries: 0 - BODY
Motor Type: Brushless
Torque: 406Nm
Breaking torque: 610Nm
Power: 415W
Max Speed: 0-2500rpm
Maximum impact rate: 0-3550ud./min
Spindle bit: 3/8" with locking ring
Number of gears: 4
Speed I gear: 0-1400rpm (tightening), 0-2500rpm (unscrewing)
Speed II gear: 0-2500rpm (tightening), 0-2500rpm (unscrewing)
Precision Wrench: 0-2500rpm (tightening), 0-2500rpm (unscrewing)
Rotational speed IV gear (Timber Screw): 0-2500rpm (tightening), 0-2500rpm (unscrewing)
Lighting: Yes light ring (3 modes - off, 2 low-high lighting levels)
Length: 123mm
Width: 60mm (motor body)
Height: 208mm
Weight: 1.1kg (without battery)
Manufacturer no: DCF923N
Equipment: Metal belt clip
Packaging: cardboard
Manufacturer: DeWALT
EAN: 5035048752401



Cordless impact wrench 3/8" XR 18V 0*AH

For professional tasks in the workshop and on the construction site, it often takes a lot of strength. Remember, strength is not everything, sometimes compact size and low weight count. When working at heights, in tight spaces, e.g. when working on car suspension, compact size is an important advantage on the roof. The DeWALT DCF923 impact wrench combines all these features for high ergonomics. The compact housing measures just 123mm, which hides a brushless motor with a power of 406Nm. All this is enclosed in a casing, covered on the handle with rubber, which improves the confidence of the grip, the whole weighs 1.1kg without a battery. DCF923 has 4 operating modes at its disposal, guaranteeing optimal speed and torque settings. Gears marked 1 and 2 are standard gears offering low and high performance. However, attention should be paid to gear 3 and 4, marked with a standard screw (3 mode - Precision Wrench) and a wood screw (4 mode - Timber Screw). These are innovative solutions for larger horses
trolls of work and precision of fastener activities. Precision Wrench mode - Provides high control during tightening, after reaching the moment of switching on the impact, the device will stop for 0.5s, Then it will start working with a stroke value of up to 3550ud./min, this will allow you to fully control the tightening process, reducing the risk of thread breakage. On reverse rotations, the highest moment is available from the beginning. However, when the impact is switched off, the device will limit the reverse rotation to prevent the fasteners from "escaping". Timber Screw Mode - Designed for fasteners of wood, optimizes and accelerates screwing, screws into wood. In dark places, LED lighting comes to the rescue, we operate the light ring using a dedicated button. The DCF923 impact wrench is compatible with all 18V, FlexVolt and PowerStack Li-Ion XR batteries.


**

Illustrative photos